MODEL 80-24
Features
- Manual punch aligner
- 80-ton open throat punch
- 24" bar shear with 4-sided blades
- Magnetic starter for safety and reliability
- Fixed or adjustable bar shear holddown
- Eyelet and forklift accommodations
- Variable stroke control
Accessories
- Punch nut wrench for L series or 150 and 500 series punch nut
- Bar shear stop for production shearing up to 24 inch lengths
- Deluxe back gauge for production shearing up to 6-foot lengths
- Punch table with adjustable jig for high production with accuracy
- Grease bank for lubricating fittings without removing covers
- Punch rack holds 30 sets of punches and dies
Power Cavity
- Bin catches steel dropping from bar shear
- Remote hydraulic foot control
- Oversize die stand for punching over 2-1/4" round (specify type and thickness of material to be punched)
- Oversize stripper for punching over 2-1/4" round
- Offset die stand for punching close to the web on angle iron (specify size of angle, largest diameter hole to be punched, and -- measuring from the inside -- how close to the web the hole is located)
Optional Tooling
Punch Station
- Square notcher
- Coper notcher
- Pipe notcher
- Brake: 6, 9, 18 or 24"
- Square notcher
- Coper notcher
- Brake: 6, 9 or 14"
- Angle shear
- Channel shear
- Rod shear (round or square)
- Z & T shear
| SPECIFICATIONS | |
| Throat Depth | 9" |
| Punch | 2" hole in 1/2" 1 3/4" hole in 3/4" 2 1/4" hole in 7/16" |
| Bar Shear | 1/4" x 24" 1/2" x 20" 3/4" x 10" 1" x 6" |
| Angle Shear 90° Slug Type Sever Cut |
6" x 6" x 1/2" 6" x 6" x 3/8" |
| Miter Angle 45° Bar Shear Slug Type |
4" x 4" x 1/2" 4" x 4" x 3/8" |
| Channel Shear | 2" and 3" combined 4", 5" or 6" standard |
| Rod Shear Round (max.) Square (max.) |
1 1/4" 1 1/4" |
| Coper Notcher 90° | For 4" x 4" x 1/2" angle |
| Square Notcher | 3" x 3" x 3/8" |
| Pipe Notcher Sched 40 or 80 |
1/2", 3/4", 1", 1 1/4", 1 1/2", 2" |
| Brake | 6", 9", 14", 18", 24" x 1/4" |
| Strokes per minute (light material) (at max capacity) |
50 9 |
| Hydraulics | 2,000 psi |
| Oil Capacity | 11 quarts |
| Motor Standard Optional |
7 1/2 HP, 3 phase 7 1/2 HP, 1 phase |
|
Dimensions Width Length Height Bar shear working height Punch table top ht. Cavity table top ht. |
36" 46" 65 1/2" 29" 38" |
| Weight (net) | 2,900 lbs |
|
UNI-HYDRO 108030 $12,455.00 "80 TON IRONWORKER W/24"" BAR SHEAR BLADE, 7-1/2"" H.P., 3 PHASE |
|
UNI-HYDRO 108010 $12,855.00 "SAME AS ABOVE: 1 PHASE, 7-1/2 H.P. |
|
UNI-HYDRO 108040 $13,685.00 "PRO 80 TON (4 STATION) 7-1/2 H.P. , 3 PHASE |
|
UNI-HYDRO 108050 $14,085.00 "SAME AS ABOVE 7-1/2 H.P. , 1 PHASE |